Dell PowerVault 51F (8P Fibre Channel Switch) User Manual
Page 141
support.dell.com
Error Messages
A-3
LSRLEN (2)
The local switch
is trying to cre-
ate a Link State
Update that
exceeds the max-
imum length.
Check that all paths and
routing tables are correct. If
they are not, reboot the
local switch.
FSPF
BADSRC (3)
The neighbor
switch domain ID
has changed,
without the link
going down.
The system automatically
recovers.
INPORT (2)
The input port in
the IU received
by the path selec-
tion task is out of
range.
Check that all paths and
routing tables are correct. If
they are not correct, reboot
the local switch.
MSG (2)
The path selec-
tion task has
received an
unknown mes-
sage from
another task.
Check that all paths and
routing tables are correct. If
they are not, reboot the
neighbor switch.
Check the paths and routes
again. If they are still incor-
rect, reboot the local switch.
REMDOMAIN (2)
The message
received from a
neighbor switch
has a source
domain ID out of
range.
Check that all paths and
routing tables are correct. If
they are not, reboot the
neighbor switch.
Check the paths and routes
again. If they are still incor-
rect, reboot the local switch.
SCN (3)
The path selec-
tion task has
received a State
Change Notifica-
tion message
that it does not
recognize.
Check that all paths and
routing tables are correct. If
they are not, reboot the
local switch.
VERSION (2)
The FSPF proto-
col version run-
ning on the local
switch is lower
than a neighbor’s
switch.
Check the protocol version
on both switches using the
fspfShow
command. If the
two versions differ, update
the software on the local
switch.
Table A-1. Errors (continued)
Module
Error
Severity
Explanation
Action