Dell PowerVault 51F (8P Fibre Channel Switch) - Manual (Page 67)

support.dell.com PowerVault 51F Commands 4-5
agtcfgShow
The agtcfgShow command displays current SNMP agent configuration. The fields
are described in Table 4-2.
aliasShow
The aliasShow command displays local Alias Server information, as shown in the fol-
lowing example. The command fields are described in Table 4-3. If there is no local
alias group, a message stating that is displayed.
Otherwise, it shows the user the
number of alias group entries created with the title:
The Local Alias Server has n entries
Alias ID Creator Token [rb, type, grptype, qlfr] Member List
switch:admin> agtcfgSet
Customizing MIB-II system variables ...
At each prompt, do one of the following:
o <Return> to accept current value,
o enter the appropriate new value,
o <Control-D> to skip the rest of configuration, or
o <Control-C> to cancel any change.
To correct any input mistake:
<Backspace> erases the previous character,
<Control-U> erases the whole line,
sysDescr: [FC Switch.]
sysLocation: [End User Premise]
sysContact: [Field Support.]
swEvevtTrapLevel: (0..5) [3]
authTrapsEnabled (true, t, false, f): [true]
SNMP community and trap recipient configuration:
Communit(rw): [Secret C0de]
Trap Recipient’s IP address in dot notation: [192.168.1.51]
Community(rw): [OrigEquipMfr]
Trap Recipient’s IP address in dot notation: [192.168.1.26]
Community(rw): [private]
Trap Recipient’s IP address in dot notation: [0.0.0.0] 192.168.
Community(ro): [public]
Trap Recipient’s IP address in dot notation: [0.0.0.0]
Community(ro): [common]
Trap Recipient’s IP address in dot notation: [0.0.0.0]
Community(ro): [FibreChannel]
Trap Recipient’s IP address in dot notation: [0.0.0.0]