Dell B2375dnf Mono Multifunction Printer - Manual (Page 147)

3 Load the print material with the side to be printed on facing up.
Depending on the paper type you are using, keep the following loading method:
• Envelopes: load them with the flap side down and with the stamp area on the top
left side.
• Transparencies: load them with the print side up and the top with the adhesive
strip entering the printer first.
• Labels: load them with the print size up and the top short edge entering the
printer first.
• Preprinted paper: load with the design face up, top edge toward the printer.
• Card stock: load them with the print side up and the short edge entering the
printer first.
• Pre printed paper: the printed side should be facing down with an uncurled edge
toward the printer.
4 Squeeze the width guide and adjust it to the width of the print material. Do not force
too much, or the paper will be bent, which will result in a paper jam or skew.
- 146 ­