Dell B2375dnf Mono Multifunction Printer - Manual (Page 228)

Access point via USB cable in Windows
• Items to prepare
– Access point
– Network-connected computer
– Software CD that was provided with your machine
– The machine installed with a wireless network interface
– USB cable
1 Check whether the USB cable is connected to the machine.
2 Turn on your computer, access point, and machine.
NOTE: If the “Found New Hardware Wizard” appears during the installation
procedure, click Cancel to close the window.
3 Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window will appear.
If the installation window does not appear, click Start All programs
Accessories
Run.
X:\ Setup.exe replacing “X” with the letter, which represents your CD/DVD drive and
click OK .
• For Windows 8,
If the installation window does not appear, from Charms, select Search
Apps and
search for Run. Type in X:\Setup.exe, replacing “X” with the letter that represents your
CD/DVD drive and click OK .
If “ Tap to choose what happens with this disc.” pop-up window appears, click the
window and select Run Setup.exe.
- 227 ­