Dell B2375dnf Mono Multifunction Printer - Manual (Page 233)

Ad hoc via USB cable in Windows
If you do not have an access point (AP), you may still connect the machine wirelessly to
your computer by setting up an ad-hoc wireless network by following the simple steps
below.
• Items to prepare
– Network-connected computer
– Software CD that was provided with your machine
– The machine installed with a wireless network interface
– USB cable
1 Check whether the USB cable is connected to the machine.
2 Turn on your computer, access point, and machine.
3 Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window will appear.
If the installation window does not appear, click Start All programs
Accessories
Run.
X:\ Setup.exe replacing “X” with the letter, which represents your CD/DVD drive and
click OK .
4 Select New Printer .
- 232 ­