Dell B2375dnf Mono Multifunction Printer - Manual (Page 47)

Powering on the Printer
CAUTION: The fusing area at the rear part of the inside of your printer becomes hot
once the printer is powered on.
CAUTION: Be careful not to be burned when you access this area.
CAUTION: Do not disassemble the printer when it is powered on. If you do, it may
give you an electric shock.
To power on the printer:
1 Plug one end of the power cord into the power receptacle at the back of the printer
and the other end into a properly grounded outlet.
2 Press the power switch to turn on the printer. The home screen appears on the display
indicating that the printer is now on.
NOTE: If you power on the printer for the first time, you have to set the language,
date, time, country and fax setup sequence. These settings may be needed also
after the firmware upgrade or after the printer is reset.
- 46 ­