Setting the sound/volume (administrator only), Setting the timeout option (administrator only), Setting the toner save mode (administrator only) – Dell B2375dnf Mono Multifunction Printer User Manual

Page 71

Advertising
background image

Setting the Sound/Volume (Administrator only)

You can set the volume for key sounds, alarm sounds, and the sound that occurs during a
fax job.

1 Press My Settings

Machine Setup

Initial Setup

Sound/Volume from the

home screen.

2 Press the appropriate option you want.

Key Sound: You can set the key sound volume for when pressing the button, you
can select

Mute, 1(low), 2(mid), and 3(high)

Alram Sound: You can set the alram sound volume, you can select Mute, 1(low),
2(mid), and 3(high).

Fax Sound

– Speaker Volume (only in communication): You can select Mute, 1(low) ~7(high).

The sounds from the telephone line through the speaker, such as a dial tone or a
fax tone. With this option set to Comm. which means Comm., the speaker is on
until the remote machine answers.

– Ring Volume: Adjusts the ringer volume. For the ringer volume, you can select

Mute, 1(low)-7(high).

Dial Tone Volume: Adjusts the dial tone volume. For the dial tone volume, you can
select Mute, 1(low)-7(high).

3 Press Check(

) then home icon (

) to return to Home Screen.

Setting the Timeout Option (Administrator only)

You can set the time the printer waits before it restores the default copy or fax settings if you
do not start copying or faxing after changing the settings on the operator panel.

1 Press My Settings

Machine Setup

Initial Setup

Timeout from the home

screen.

2 Press the left/right arrows to select on/off.

3 Enter the timeout value using the up/down arrows or direct input using the popup

keyboard.

4 Press Check(

) then home icon (

) to return to Home Screen.

Setting the Toner Save Mode (Administrator only)

Toner save mode allows your machine to use less toner on each page. Activating this mode
extends the life of the toner cartridge beyond what one would experience in the normal
mode, but it reduces print quality.

1 Press My Settings

Machine Setup

Initial Setup

Toner Save from the home

screen.

2 Press the left/right arrows to select On.

3 Press the home icon (

) to return to Home Screen.

- 70

­

Advertising