Dell Compellent Series 40 - Manual (Page 153)

145
Viewing Controller Properties
Viewing Controller IP Properties
Note Do not change any IP properties in the Controller Properties window without the
guidance of a Dell Support Services. Changing IP properties can result in the loss of
data.
1 In the system tree, select a Controller.
2 From the shortcut menu, select Properties.
3 Click the IP tab.
Figure 113. Controller IP Properties
In the Controller Properties window, the system permits you to change the Ether 0 and
Ether 1 IP Addresses, Net Mask, Gateway, DNS Servers, and Domain Name.
4 Click OK.
Viewing and Adding Controller Information
1 In the system tree, select a Controller.
2 From the shortcut menu, select Properties. The Controller Properties window
appears.
3 Click the Info tab to view information about controller creation and updates.
4 Optionally, you can add notes (up to 255 characters).