Dell Compellent Series 40 - Manual (Page 223)

215
Configuring System Access via IP Filtering
The System Manager notifies you if there is no filter for the current User Name and IP
Address and warns you that you must include this information to have access at the next
login. From this window, you can:
• If no filter exists, Create Filter for this User allows you create a new filter for the
current user that will give the current User Name and IP Address access for
subsequent log ons. If a filter already exists for the current user and IP address, this
button is not displayed.
• Create IP Filter allows you to create a new IP filter.
• View Existing Filters allows you to view all existing filters including User Names, User
Privileges, and the IP Addresses or Ranges.
Creating an IP Filter for a User
1 Click Create Filter for this User on the first screen of the Manage IP Filters wizard. A
summary window showing the IP Filter that will be created for the current User Name
and IP Address appears.
Figure 178. Create Filter for this User
If you are using Network Address Translation (NAT), warnings appear cautioning you to use
the address that is seen by the Storage Center
2 After you have double checked all information, click Create Now to create the access rule
filter.