Dell Compellent Series 40 - Manual (Page 169)

161
Viewing iSCSI Cards
• Speed: of IO transfer
• IP Address, Subnet Mask, and Gateway IP Address
• iSCSI Name and Target Alias
• Fault Domain, Network, and Usage as entered via the Configure Local Ports
wizard.
• Port purpose
• Preferred Controller: Appears if a system is rebooted.
• Maximum Transmission Unit
• VLAN Tagging
• Initiator Count: Number of front end devices
• Target Count: Number of disk drives
• Both Count: Total of front-end devices and back-end disk drives
• Map Count: Number of volumes mapped to this system
Note Virtual Ports do not display hardware because the port is not reliant on a card.