Dell Compellent Series 40 - Manual (Page 243)

235
Configuring Global Disk Spares
Configuring Global Disk Spares
1 From the Storage Management menu, choose System > Properties.
2 Click the Disk Sparing tab.
Figure 194. System Properties – Disk Sparing
3 Enter the default number of spares per storage enclosure. This is the minimum number
of disks to be selected in an enclosure when creating a disk folder before a hot spare is
selected.
4 Enter the minimum disks per enclosure before auto-sparing. This is the number of disks
that have to be selected in a Storage Center Storage Enclosure before a hot spare is
selected.
5 Click OK to save changes.