Dell Compellent Series 40 - Manual (Page 86)

78 Storage Center 5.5 System Manager User Guide
Volumes
When creating a server cluster, Storage Center attempts to map an included volume to the
same LUN on all cluster servers. If the LUN selected is not available on a particular
server, the mapping is not performed and the volume is only partially connected to
the cluster.
Mapping a Volume to Remote System
Mapping a volume to a remote system causes the volume to appear as a remote volume
on the remote system. The volume can then be used as a replication target.

To map a volume to a remote system
1 In the system tree, select an unmapped volume.
2 From the shortcut menu, select Map Volume to Remote System. A list of remote
systems appears.
3 Select a remote system.
a Optional: Click Advanced to restrict mapping paths.
Figure 60. Map Volume to Remote System Advanced
b Restrict the path to one transport, such as FC or iSCSI.
c In a clustered-controller system, select a controller to which to map the volume.
d Click Continue.
4 The system asks you to confirm. Click Create Now.