Dell Compellent Series 40 - Manual (Page 188)

180 Storage Center 5.5 System Manager User Guide
Controllers
Figure 149. Remote Compellent Connection Properties
Changing a Remote iSCSI Name
This would be an unusual change. In general there is no good reason to do it. The iSCSI
name can be changed if you are using NAT and the iSCSI name was incorrect or you were
previously using NAT and no longer want to use it. You can blank out the name.

To change a remote connection iSCSI name
1 View properties, as described in Viewing Remote Connection Properties on page 179 .
Click Change iSCSI Name.
2 Enter a new name.
3 Click OK. The system warns you that this change will disrupt iSCSI traffic currently in
progress. Click Yes (Save Changes). The name is changed.