Dell Compellent Series 40 - Manual (Page 29)

21
Introduction
6 Enter a Volume Size. The default is 500 GB. Remember, this space is not reserved,
only allocated. This means that you can allocate more disk space than you actually
have. You need to add additional disks when the space actually used reaches 80% of
total physical space.
7 Select or disable Show block size in volume wizards.
8 Enter a Base Volume Name. When you create many volumes at once, the System
Manager increments this name by one. As you quickly add volumes, the names appears
as New Volume 1, New Volume 2, New Volume 3, etc.
Set Volume Replay Defaults
Volume Replays defaults set the default Replay schedule for volumes you create.

To configure volume Replays
1 In the Configure User Volumes Defaults window, select the Replay tab. The default
Replay schedule appears.
Figure 12. Set Volume Replay Defaults
2 From the dropdown menu at the top of the window, choose to be queried for a Replay
schedule when you create a volume or to automatically use the default Replay schedule
for new volumes.