Dell Compellent Series 40 - Manual (Page 190)

182 Storage Center 5.5 System Manager User Guide
Controllers
Adding a Remote CHAP Initiator
1 In the system tree, select the iSCSI card folder.
2 From the shortcut menu, select Add Remote CHAP Initiators. The Add iSCSI Remote
CHAP Initiators window appears.
3 Enter the CHAP Name and CHAP Secret of the Remote CHAP Initiator to be added to
the Control Port or IO Card.
Server CHAP Secret is required only if using Bi-Directional Authentication.
4 Click Add Now. The Remote CHAP Initiator is added.
Enabling CHAP
Note CHAP authentication is enabled on individual IO Cards in legacy port mode and on
Control Ports in Virtual Port mode.
1 In the system tree, select a port.
• In Virtual Port mode, select the iSCSI Control Port.
• In non-Virtual Port mode, select an iSCSI card.
2 From the shortcut menu, select Properties. The IO Card Properties window appears.
3 Click on the CHAP tab on this window. The CHAP IO information window appears.
Figure 150. CHAP IO Card Properties
Note The CHAP name is an iSCSI Qualified Name (IQN).
4 Check CHAP Authentication. The CHAP Secret name is no longer grayed-out.
5 For bi-direction authentication, enter any 12-character alphanumeric secret (similar to a
password) in the CHAP Secret field.