Two Brothers Racing 2008 Kawasaki Teryx 750 User Manual
V.a.l.e, Teryx 750, 2008 kawasaki
V a r i a b l e a x i s l o c k i n g e x h a u s t
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle technician.
If you have any doubts as to your ability to install this performance part, please consult with
your local motorcycle dealer. Read all instructions first before starting installation. Make sure
the UTV and exhaust system are completely cool before starting the installation. Be sure to
save all stock components for possible use later.
V.A.L.E.™ Complete DUAL Exhaust System with M-7 Canisters
Part # 005-2240106D
1. Make sure the UTV is completely cool before starting the instal-
lation. Make sure the UTV is secure with the parking brake set.
2. Remove bed from unit by removing pins, frame mounts and
wires. Get a second person to help lift bed assembly off the
3. Remove heat-shield.
4. Remove driver and passenger seats.
5. Remove engine upper covers by removing the quick rivets with
a flat screwdriver and screws with Phillips screw driver.
6. Remove center cover by removing the quick rivets with
7. Remove seat lower cover by removing the quick rivets and
screws attaching it to the frame.
8. Remove lower left seat plate to access the front header flange nuts.
9. Remove engine bottom guard by removing (10) engine guard
bolts from underneath of vehicle.
10. Remove OEM muffler and header pipes.
NOTE: Instructions continued on Page 2...
Left Muffler Canister M-7
Right Muffler Canister M-7
Front Header Assembly #1
Front Header Assembly #2
Heavy Duty Muffler Clamp
Header Collar Long
Steel Header Flange
X-Lite V.A.L.E Retaining Ring
Billet Bolt-on Muffler Mount (Front)
Billet Bolt-on Muffler Mount (Back w/ radius)
8x25mm Socket Head Cap Screws
M8 Split High Collar Lock Washers
M6 Split High Collar Washers
8x1.25mm Pitch Metal Locking Flange Nuts
8mm Flange Nuts
8mm Large Flat Washers
8x20mm Socket Head Cap Screws
Spark Arrester Screen (Installed)
6x14mm Socket Head Cap Screws
14” Tube with Brackets
#150 Main Jet
#145 Main Jet
5mm Long Handle Ball end hex key
Permatex High Strength Threadlock
TBR Logo Decal Kit