Two Brothers Racing 2008 Kawasaki Teryx 750 - Manual (Page 2)

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
2008 Kawasaki
Teryx 750
V.A.L.E.™ Complete DUAL Exhaust System with M-7 Canisters
Part # 005-2240106D
Installation Instructions
11. Remove gasket from header collar.
12. Install OEM header collar gasket and supplied TBR header
collars and flanges to the engine. Secure with supplied locking
bolts to 13 ft. lbs.
13. Install rear muffler mounting supports and mounting bar to rear
frame section as shown with muffler mounting tabs facing the rear
of vehicle. Secure with the 8mm socket head cap screws and lock
washers provided. Tighten when everything is aligned to 13 ft. lbs.
14. Install rear mounting brackets to rear frame tube as shown.
Leave loose for now.
15. Install front header pipe “A” and attach to header collar with
supplied spring. Then join with front header pipe “B” and join
with spring. make sure an x-ring is on the tube before joining
them together.
16. Install rear header and attach to header flange with supplied
spring. Make sure x-ring is on header pipe.
17. Install the TBR mufflers using the rubber lined muffler clamps
and supplied bolts and loosely attach mufflers to muffler
mounting brackets.
NOTE: Instructions continued on Page 3...