Two Brothers Racing Yamaha FJR1300 - Manual (Page 2)

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Care & Cleaning / Warranty
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. For cleaning use
a mild spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue
after a few heat cycles, this is a normal characteristic of high quality stainless steel.
Carbon Fiber Mufflers: Always make sure the fiberglass packing inside is in good
condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the Carbon Fiber sleeve. TBR sells repack kits (TBR part # 005-10038)
that include new rivets and repack material as well as a drill bit (#30), making it easy
to do yourself. Also, NEVER dyno test your bike with carbon fiber mufflers installed
- the intense heat and lack of cooling air can quickly cause the CF material to burn.
Two Brothers Racing does not provide a warranty for burned carbon fiber.
Aluminum Mufflers: Use an aluminum or mag wheel polish such as Mother’s to
restore the bright finish to factory spec.
two brothers racing products are intended for closed course competition purposes only, and therefore
are sold “as is” without warranty. Two Brothers Racing specifically disclaims any warranties of
merchantability or fitness for a particular purpose and disclaims all responsibility for consequential and
incidental damages or any other losses arising from the use of these products or parts.
Qty. Description Part Number
1 Muffler Canister M-2 Polished Aluminum (Right) 005-206M
1 Muffler Canister M-2 Polished Aluminum (Left) 005-206ML
1 Stainless Steel Slip Tube (Right) 005-15604SR
1 Stainless Steel Slip Tube (Left) 005-15604SL
2 Muffler Clamp 005-2C
1 HARDWARE KIT 005-156-3
2 X-Ring (half) 005-7-2-3
2 8mm Aluminum Spacer 005-S-810
2 10x50mm Flange Bolt 005-FB1050
2 10mm Nut 005-NN11
8 6x14mm Socket Head Cap Screws 005-SH614
8 Split Lock Washer 005-WL6
2 Barrel Clamp 005-27-61MSH
1 5mm Long Handle Ball end hex key 005-9-18610
1 Permatex Black Gasket Maker 031-P22072
1 TBR Sticker Kit 015-10212
2006-10 Yamaha
FJR1300
Slip-On Exhaust System with Dual M-2 Exhaust Canisters
Part # 005-1560406