Two Brothers Racing Kawasaki Teryx 750 Dyna FS Ignition - Manual (Page 2)

DYNA FS / KAWASAKI TERYX 750 IGNITION CURVE
(Assumes 5° base timing at crank)
RPM / 1000
I
G
N
IT
IO
N
A
D
V
A
N
C
E
(C
RA
NK
S
H
A
FT
DE
G
R
E
E
S
)
WARNING:
Installation of a grounded tether kill switch to the ignition coil signal will
damage the CDI and void the warranty.
12V DC-CDI ( Teryx 750 / Prairie 650 / etc.): Use a normally closed tether kill switch connected in series with
the +12V input (BROWN) to the ignition. When the tether is removed, it should disconnect the +12V power to
the ignition. If a normally closed tether kill switch cannot be located, then a grounded tether can be used to
ground the pickup signal (Black/White wire at the ignition module)
2801374 2-18-08 REV A