Two Brothers Racing Polaris RZR 800 Coil Kit User Manual
Page 2
Advertising
16)
Check that all wires are routed securely, and away from exhaust.
17)
Connect the battery. Replace transmission duct, engine cover, and seats.
18)
Turn ignition key on. Start the engine. Installation is complete!
1. New plug wire and terminals.
2. Tools required.
3. Original Boot, pulled off.
4. Cut new wire at 24 inches.
DYNATEK
164 S. Valencia St., Glendora, CA 91741 800-928-3962
www.dynaonline.com
2801398B
5. New wire sleeved.
6. Grease wire and boot.
Advertising