Two Brothers Racing Polaris RZR 800 Coil Kit - Manual (Page 3)

DYNATEK 164 S. Valencia St., Glendora, CA 91741 800-928-3962 www.dynaonline.com 2801398B
7. Slide boot on. 8. Strip insulation off carbon core.
9. ¾ inch exposed. 10. Bend back carbon center.
11. Position terminal on wire. 12. Position crimp tool on terminal.
Squeeze terminal sides with pliers. Squeeze terminal until crimp is secure.
13. Terminal after crimping. 14. Slide boot up to terminal.