Two Brothers Racing Honda XR50R - Manual (Page 2)

7. Place new spring onto shock.
8. Screw top eyelet onto shaft.
9. Tighten 14mm nut and eyelet the same way it was removed.
10. Apply a small amount of grease to the top and bottom shock
bolts.
11. Reinstall shock onto bike using the stock hardware. Torque top
and bottom shock bolts to 25 ft. lbs.
12. Your finished, check all fasteners before and after your first
ride.
XR50R-Rear-Shock-Spring Instructions.qxd PAGE 2