Cisco 3.3 User Manual
Page 219
6-29
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 6 User Group Management
Configuration-specific User Group Settings
•
Assigned from AAA Client pool—The IP address is assigned by an IP
address pool assigned on the AAA client.
•
Assigned from AAA server pool—The IP address is assigned by an IP
address pool assigned on the AAA server.
To set an IP address assignment method for a user group, follow these steps:
Step 1
In the navigation bar, click Group Setup.
The Group Setup Select page opens.
Step 2
From the Group list, select a group, and then click Edit Settings.
The Group Settings page displays the name of the group at its top.
Step 3
From the Jump To list at the top of the page, choose IP Address Assignment.
Step 4
In the IP Assignment table, do one of the following:
•
Select No IP address assignment.
•
Select Assigned by dialup client.
•
Select Assigned from AAA Client pool. Then, type the AAA client IP pool
name.
•
Select Assigned from AAA pool. Then, select the AAA server IP pool name
in the Available Pools list and click --> (right arrow button) to move the name
into the Selected Pools list.
Note
If there is more than one pool in the Selected Pools list, the users in
this group are assigned to the first available pool in the order listed.
Tip
To change the position of a pool in the list, select the pool name and click
Up or Down until the pool is in the position you want.