Configuring a secondary ciscosecure acs, Configuring a secondary cisco secure acs – Cisco 3.3 User Manual
Page 345
9-17
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 9 System Configuration: Advanced
CiscoSecure Database Replication
Configuring a Secondary Cisco Secure ACS
Note
If this feature does not appear, click Interface Configuration, click Advanced
Options, and select the CiscoSecure ACS Database Replication check box.
Select the Distributed System Settings check box if not already selected.
The CiscoSecure Database Replication feature requires that you configure
specific Cisco Secure ACSes to act as secondary Cisco Secure ACSes. The
components that a secondary Cisco Secure ACS is to receive must be explicitly
specified, as must be its primary Cisco Secure ACS.
Replication is always initiated by the primary Cisco Secure ACS. For more
information about sending replication components, see
Scheduling Replication, page 9-21
Caution
The CiscoSecure database components received by a secondary Cisco Secure
ACS overwrite the CiscoSecure database components on the secondary
Cisco Secure ACS. Any information unique to the overwritten database
component is lost.
Before You Begin
Ensure correct configuration of the AAA Servers table in the secondary
Cisco Secure ACS. This secondary Cisco Secure ACS must have an entry in its
AAA Servers table for each of its primary Cisco Secure ACSes. Also, the AAA
Servers table entry for each primary Cisco Secure ACS must have the same shared
secret that the primary Cisco Secure ACS has for its own entry in its AAA Servers
table. For more information about the AAA Servers table, see
.
To configure a Cisco Secure ACS to be a secondary Cisco Secure ACS, follow
these steps:
Step 1
Log in to the HTML interface on the secondary Cisco Secure ACS.
Step 2
In the navigation bar, click System Configuration.
Step 3
Click CiscoSecure Database Replication.
The Database Replication Setup page appears.