Cisco 3.3 User Manual

Page 229

Advertising
background image

6-39

User Guide for Cisco Secure ACS for Windows Server

78-16592-01

Chapter 6 User Group Management

Configuration-specific User Group Settings

To configure IETF RADIUS attribute settings to be applied as an authorization for
each user in the current group, follow these steps:

Step 1

In the navigation bar, click Group Setup.

The Group Setup Select page opens.

Step 2

From the Group list, select a group, and then click Edit Settings.

The Group Settings page displays the name of the group at its top.

Step 3

From the Jump To list at the top of the page, choose RADIUS (IETF).

Step 4

For each IETF RADIUS attribute you need to authorize for the current group,
select the check box next to the attribute and then define the authorization for the
attribute in the field or fields next to it.

Step 5

To save the group settings you have just made, click Submit.

For more information, see

Saving Changes to User Group Settings, page 6-56

.

Step 6

To configure the vendor-specific attributes (VSAs) for any RADIUS network
device vendor supported by Cisco Secure ACS, see the appropriate section:

Configuring Cisco IOS/PIX RADIUS Settings for a User Group, page 6-40

Configuring Cisco Aironet RADIUS Settings for a User Group, page 6-41

Configuring Ascend RADIUS Settings for a User Group, page 6-43

Configuring Cisco VPN 3000 Concentrator RADIUS Settings for a User
Group, page 6-44

Configuring Cisco VPN 5000 Concentrator RADIUS Settings for a User
Group, page 6-46

Configuring Microsoft RADIUS Settings for a User Group, page 6-47

Configuring Nortel RADIUS Settings for a User Group, page 6-49

Configuring Juniper RADIUS Settings for a User Group, page 6-50

Configuring BBSM RADIUS Settings for a User Group, page 6-51

Step 7

To continue specifying other group settings, perform other procedures in this
chapter, as applicable.

Advertising