Cisco 3.3 User Manual
Page 265
7-19
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 7 User Management
Basic User Setup Options
with ISDN, the quota is not updated until all sessions terminate, which means that
a second channel will be accepted even if the first channel has exhausted the quota
allocated to the user.
To set usage quota options for a user, follow these steps:
Step 1
Perform Step 1 through Step 3 of
Adding a Basic User Account, page 7-4
The User Setup Edit page opens. The username being added or edited is at the top
of the page.
Step 2
In the Usage Quotas table, select Use these settings.
Step 3
To define a usage quota based on duration of sessions for a user, follow these
steps:
a.
Select the Limit user to x hours of online time check box.
b.
Type the number of hours to which you want to limit the user in the Limit
user to x hours of online time box. Use decimal values to indicate minutes.
For example, a value of 10.5 would equal 10 hours and 30 minutes.
Note
Up to 10 characters are allowed for this field.
c.
Select the period for which you want to enforce the time usage quota:
•
per Day—From 12:01 a.m. until midnight.
•
per Week—From 12:01 a.m. Sunday until midnight Saturday.
•
per Month—From 12:01 a.m. on the first of the month until midnight on
the last day of the month.
•
Absolute—A continuous, open-ended count of hours.
Step 4
To define usage quotas based on the number of sessions for a user, follow these
steps:
a.
Select the Limit user to x sessions check box.
b.
Type the number of sessions to which you want to limit the user in the Limit
user to x sessions box.
Note
Up to 10 characters are allowed for this field.