Cisco 3.3 - Manual (Page 793)

F-7
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Appendix F RDBMS Synchronization Import Definitions
Action Codes
Action Codes for Creating and Modifying User Accounts
Table F-3 lists the action codes for creating, modifying, and deleting user
accounts.
Note Before you can modify a user account, such as assigning a password, you must
create the user account, either in the HTML interface or by using the ADD_USER
action (action code: 100).
Transactions using these codes affect the configuration displayed in the User
Setup section of the HTML interface. For more information about the User Setup
section, see
Chapter 7, “User Management” .
Table F-3 User Creation and Modification Action Codes
Action
Code
Name Required Description
100 ADD_USER UN|GN,
V1 Creates a user (32 characters maximum). V1 is used as
the initial password. Optionally, the user can also be
assigned to a group.
101 DELETE_USER UN Removes a user.
102 SET_PAP_PASS UN, V1 Sets the PAP password for a user (64 ASCII characters
maximum). CHAP/ARAP will also default to this.
103 SET_CHAP_PASS UN, V1 Sets the CHAP/ARAP password for a user (64
characters maximum).
104 SET_OUTBOUND_
CHAP_PASS UN, V1 Sets the CHAP/ARAP password for a user (32
characters maximum).