Cisco 3.3 - Manual (Page 351)

9-23
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 9 System Configuration: Advanced
CiscoSecure Database Replication
Tip Clicking times of day on the graph selects those times; clicking again
clears them. At any time you can click Clear All to clear all hours, or you
can click Set All to select all hours.
Step 7 If you want to have this Cisco Secure ACS send replicated database components
immediately upon receiving replicated database components from another
Cisco Secure ACS, select the Automatically triggered cascade option.
Note If you specify the Automatically triggered cascade option, you must
configure another Cisco Secure ACS to act as a primary Cisco Secure
ACS to this Cisco Secure ACS; otherwise, this Cisco Secure ACS never
replicates to its secondary Cisco Secure ACSes.
Step 8 You must specify the secondary Cisco Secure ACSes that this Cisco Secure ACS
should replicate to. To do so, follow these steps:
Note Cisco Secure ACS does not support bidirectional database replication. A
secondary Cisco Secure ACS receiving replicated database components
verifies that the primary Cisco Secure ACS is not on its Replication list.
If not, the secondary Cisco Secure ACS accepts the replicated database
components. If so, it rejects the components. For more information about
replication partners, see
Inbound Replication Options, page 9-15 .
a. In the Outbound Replication table, from the AAA Servers list, select the name
of a secondary Cisco Secure ACS to which you want the primary
Cisco Secure ACS to send its selected replicated database components.
Note The secondary Cisco Secure ACSes available in the AAA Servers list
are determined by the AAA Servers table in Network Configuration.
For more information about the AAA Servers table, see
AAA Server
Configuration, page 4-21 .
b. Click --> (right arrow button).
The selected secondary Cisco Secure ACS moves to the Replication list.