Configuring tacacs+ settings for a user – Cisco 3.3 User Manual

Page 270

Advertising
background image

Chapter 7 User Management

Advanced User Authentication Settings

7-24

User Guide for Cisco Secure ACS for Windows Server

78-16592-01

Configuring TACACS+ Settings for a User

You can use this procedure to configure TACACS+ settings at the user level for
the following service/protocols:

PPP IP

PPP IPX

PPP Multilink

PPP Apple Talk

PPP VPDN

PPP LCP

ARAP

Shell (exec)

PIX Shell (pixShell)

SLIP

You can also enable any new TACACS+ services that you may have configured.
Because having all service/protocol settings display within the User Setup section
would be cumbersome, you choose what settings to hide or display at the user
level when you configure the interface. For more information about setting up new
or existing TACACS+ services in the Cisco Secure ACS HTML interface, see

Protocol Configuration Options for TACACS+, page 3-7

.

If you have configured Cisco Secure ACS to interact with a Cisco
device-management application, new TACACS+ services may appear
automatically, as needed to support the device-management application. For more
information about Cisco Secure ACS interaction with device-management
applications, see

Support for Cisco Device-Management Applications, page 1-19

.

For more information about attributes, see

Appendix B, “TACACS+

Attribute-Value Pairs”

, or your AAA client documentation. For information on

assigning an IP ACL, see

Assigning a Downloadable IP ACL to a User, page 7-21

.

Advertising