Cisco 3.3 - Manual (Page 148)

Chapter 4 Network Configuration
Network Device Group Configuration
4-32
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Renaming a Network Device Group
Caution When renaming an NDG, ensure that there are no NARs or other shared profile
components (SPCs) that invoke the original NDG name. Cisco Secure ACS
performs no automatic checking to determine whether the original NDG is still
invoked. If a user’s authentication request incorporates an SPC that invokes a
non-existent (or renamed) NDG, the attempt will fail and the user will be rejected.
To rename an NDG, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
The Network Configuration page opens.
Step 2 In the Network Device Groups table, click the NDG that you want to rename.
Tip If the Network Device Groups table does not appear, click Interface
Configuration, click Advanced Options, and then select the Network
Device Groups check box.
Step 3 At the bottom of the page, click Rename.
The Rename Network Device Group page appears.
Step 4 In the Network Device Group Name box, type the new name (up to 24 characters).
Step 5 Click Submit.
The name of the NDG is changed.
Deleting a Network Device Group
When you delete an NDG, all AAA clients and AAA servers that belong to the
deleted group appear in the Not Assigned AAA Clients or Not Assigned AAA
Servers table.