Cisco 3.3 User Manual

Page 800

Advertising
background image

Appendix F RDBMS Synchronization Import Definitions

Action Codes

F-14

User Guide for Cisco Secure ACS for Windows Server

78-16592-01

Action Codes for Initializing and Modifying Access Filters

Table F-4

lists the action codes for initializing and modifying AAA client access

filters. AAA client access filters control Telnet access to a AAA client. Dial
access filters control access by dial-up users.

271

SET_DCS_NDG_MAP

UN|GN,
VN,V1,
V2

Use this action code to map between the device
command set and the NDG when the assignment type
specified by a 270 action code is

ndg

.

VN defines the service. Valid service types are:

shell—Cisco IOS shell command authorization.

pixshell—Cisco PIX command authorization.

Note

If additional DCS types have been added to
your Cisco Secure ACS, you can find the valid
value in the Interface Configuration page for
TACACS+ (Cisco IOS). The valid values
appear in parentheses after the service title,
such as

PIX Shell (pixshell)

.

V1 defines the name of the NDG. Use the name of the
NDG as it appears in the HTML interface. For example,
if you have configured an NDG named “East Coast
NASes” and want to use action 271 to apply a DCS to
that NDG, V1 should be “East Coast NASes”.

V2 defines the name of the DCS. Use the name of the
DCS as it appears in the HTML interface. For example,
if you have configured a DCS named “Tier2 PIX Admin
DCS” and want to use action 271 to apply it to an NDG,
V2 should be “Tier2 PIX Admin DCS”.

Table F-3

User Creation and Modification Action Codes (continued)

Action
Code

Name

Required

Description

Advertising