Connecting optional video equipment, Connecting only one video equipment, Enjoying dolby pro logic surround effects – Sony LBT-D670AV User Manual
Page 24: Adjusting the sound level
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting
Optional
Video Equipment
Connecting only one video
equipment
Use an audio/video connecting cable and
make sure to connect the plugs to jacks of
the same color.
rear panel
Connect
With
AUDIO OUT jacks of
VIDEO (AUDIO)
the video equipment
IN jacks
Press FUNCTION repeatedly until
"VIDEO" appears in the display.
The video equipment sound comes through
the speakers. You can also record the video
equipment sound.
Connecting more than two
video equipment at the
same time
Use an audio/video connecting cable and
make sure to connect the plugs to jacks of
the same color.
rear panel
Connect the video equipment to the TV. For
more details concerning the connections,
refer to the operation manuals of the video
equipment and TV.
Connect
With
television system
VIDEO (AUDIO)
IN jacks
Select the input source of the desired VCR
on the TV.
Then press FUNCTION repeatedly until
"VIDEO” appears in the display.
The video equipment sound comes through
the speakers. You can also record the video
equipment sound.
Enjoying Dolby Pro
Logic Surround
Effects
To make the Dolby Pro Logic Surround
effects work, you need to use video tapes or
laser discs etc. that carry
or
P и 0 • l 0 0 I c
Adjusting the Sound Level
To enjoy Dolby Pro Logic Surround effects,
adjust the volume levels of the front, center
and rear speakers by using the test tone.
24
Chapter 6: Dolby Pro Logic Surround