Setting, Connecting the stereo, Inserting the batteries – Sony LBT-D670AV User Manual
Page 4: Setting the clock, Connecting the, Speakers, Before connecting the speakers, Connecting the front speakers, Connecting the center speaker, Connecting the rear speakers
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 1:
Setting
Up
Connecting the Stereo
Setting up the Speakers for
Dolby Pro Logic Surround
inserting the Batteries
Setting the Clock
Connecting the Stereo
Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see "Connecting
Optional Video Equipment" in Chapter 6
and "Connecting Optional Equipment" in
Chapter 7.
Connecting the
STEP 1
Speakers
Before connecting the speakers
Twist the speaker cable coating and pull it
from the end of the cable.
Connecting the front speakers
Cormect the right front speaker to the
FRONT SPEAKER R cormectors and the left
front speaker to the FRONT SPEAKER L
connectors with the red cord to + and the
black cord to -.
black
Connect this portion
Connecting the center speaker
Cormect the center speaker to the
SURROUND SPEAKER CENTER
connectors with the gray cord to + and the
gray with black stripes cord to -.
rear
Connecting the rear speakers
Connect the right rear speaker to the
SURROUND SPEAKER REAR R cormectors
and the left rear speaker to the
SURROUND SPEAKER REAR L connectors
with the gray cord to + and the gray with
black stripes cord to -.
STEP 2
Antenna
Connecting the
AM
?50
(supplied)
*Note: Extend it horizontally
To set up the AM loop antenna
Connect this portion
^ Chapter 1: Setting Up