To stop playing, To cancel shuffle play, To select the desired cd – Sony LBT-D670AV User Manual
Page 9: To change the order of programmed tracks, Repeating all the tracks, Playing tracks in the desired order (program play), Playing tracks repeatedly (repeat play)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To stop playing
Press □ (or ■ on the remote) on the CD
player.
To cancel shuffle play
Press CONTINUE.
To select the desired CD
Press DISC 1 - 5 on the CD player during
"1 DISC SHUFFLE" play.
2
Press PROGRAM.
"PROGRAM" appears in the display.
Playing Tracks in the
Desired Order
(program play)
You can program up to 32 tracks from all
the CDs in the order you want them to be
played.
5
1
6
□
^ - 2 , 5
3 Press DISC SKIP (or D.SKIP on the
remote) repeatedly (or DISC 1- 5) to
choose a CD.
4
Turn the JOG dial (or press !◄◄ /►►!
on the remote) to choose a track.
The chosen track number appears and
the playing time flashes for about 15
seconds in the display.
5
Press PROGRAM or ENTER/NEXT.
The chosen track is programmed and its
number appears in the music calendar.
If the track number disappears before
you press PROGRAM or
ENTER/NEXT, go back to step 3.
To program additional tracks from the
same CD, repeat steps 4 and 5.
To program additional tracks from
another CD, repeat steps 3 to 5.
Note
If - " appears instead of the total
playing time, this means;
-you have programmed a track number
which is more than 20, or
-the total time is 100 minutes or more.
6
Press O on the CD player (or CD O
on thge remote.)
All the tracks play in the programmed
order.
To
Press
Check the program
CHECK on the
remote repeatedly*'
Program a pause
DD*^ (or
II
on the
remote)
Stop play
□ (or ■ on the
remote)
Cancel program play
CONTINUE*"
Erase a track from
the end
CLEAR on the
remote in stop mode
Erase a specific
track
CHECK on the
remote repeatedly
so the number of
the track appears,
and press CLEAR
on the remote
Erase the entire
program
□ (or ■ on the
remote) once in
stop mode or twice
while playing
After the last track appears, "CHECK
END" appears in the display.
»2 "p" appears in the display and the total
playing time is reset to 0.00.
The program is erased.
To change the order of programmed
tracks
Erase the entire program and create a new
one.
The whole program is erased also when:
•
you select another play mode.
• you exchange or remove the CDs.
Playing Tracks
Repeatedly (repeat
play)
The repeat play function repeats a single
CD or all CDs in normal, program, and
shuffle play.
In normal play mode only, the CD player
can also repeat a single track.
Repeating all the tracks
1
Press REPEAT once so that "REPEAT"
appears in the display.
ffpir
2
Press 1> on the CD player.
continue to next page ->
1
Press FUNCTION repeatedly until
"CD" appears in the display.
Chapter 2; the CD Player