Canon BJ-200e - Manual (Page 14)

Aligns paper in the sheet feeder. You can adjust the guide for paper
widths of up to 9 1/2 inches (240 mm).
Paper rest
Keeps the paper straight in the sheet feeder and helps prevent misfeeds.
Extend this support before loading a stack of paper in the sheet feeder.
Sheet feeder
Stacks up to 100 sheets of paper for automatic feeding. You can also
manually feed a single sheet, such as a transparency or card stock.
Paper selection lever
Selects the appropriate paper setting. For loading multiple sheets of
normal-weight paper, set this lever to the back position. For envelopes
or thick paper, set this lever to the front position. (Leave this lever in the
back position when loading stacks of normal paper.)
Front cover
Allows access to the inside of the printer when you are installing the ink
cartridge or adjusting the paper thickness lever.
Paper exit support
Provides support when outputting letter-size sheets of paper. Pull out
the extension before printing.
Operator panel
Controls the printer and defines basic printer operations. The various
lights on the operator panel indicate the status of the printer, and identify
the print mode you've selected. See Chapter 4, Using the Operator
Panel, for complete information on these buttons and lights.
DIP switch cover
Protects the DIP switches. You use these switches to change the
printer's factory default settings. For information about changing the
default settings, see Chapter 8, Customizing the Printer.
From the Back