Canon BJ-200e - Manual (Page 41)

1. Turn on your computer.
2. Make backup copies of the Windows Driver and On-Line Guide
diskettes.
3. If you are not already in Windows, start Windows by typing WIN
and pressing Enter .
4. Insert the first diskette (Disk 1 of 2) of the Windows Driver and
On-Line Guide into disk drive A (or your desired drive).
5. From the Program Manager, select the File menu and then choose
the Run option.
6. In response to the Command Line prompt, enter the path name
that identifies the SETUP.EXE file on the Windows Driver and
On-Line Guide diskette and then click on OK. For example:
A:\SETUP.EXE
7. Now follow the instructions on the screen to install the Windows
driver and/or the On-Line Guide.
The SETUP program installs the Windows driver in the directory you
specify. If you choose to install the On-Line Guide, the SETUP program
creates an icon in the Program Manager. Whenever you need
information about the BJ-200e, you can open the icon and look up the
desired information.
Printer Setup Within Windows
After you install the Canon BJ-200e printer driver, you can run the
Setup program. This is located in the Printers Control Panel.
If you are using Windows 3.1, select the Setup button from the Printers
dialog box. If you are using Windows 3.0, select the Configure button
and then the Setup button..
When you start the Setup program, Windows displays the Canon BJ-
200e Setup dialog box:
NOTE: Make sure the Windows Control Panel is closed.
NOTE: For faster printing operations in Windows, do not use the
Windows Print Manager.