Canon BJ-200e - Manual (Page 31)

receive data from your computer. At this time, you can send print data
from your computer to the printer.
If you want to pause a print operation, press the ON LINE button again
to set the printer off-line. The ON LINE light will go off and the printer
will stop. To start printing again, press the ON LINE button.
Feeding Paper
When the printer is off-line, you can use the LF/FF button to advance
the paper in the printer. You can perform a line feed or a form feed, or
you can eject a sheet of paper.
Form feeding
If you are loading paper, make sure the printer is off-line. Press the
LF/FF button to load the first sheet of paper to its top of form. (If you
are running a software application, you don't need to perform this step.
The application will tell the printer when to load paper.)
Line feeding
When a sheet of paper is loaded and the printer is off-line, press the
LF/FF button to advance the paper one line. Press the button repeatedly
to feed many lines.
Ejecting paper
To eject a sheet of paper, make sure the printer is off-line, then press
and hold the
LF/FF button for more than one second. The printer will
eject the current sheet of paper.
Selecting a Print Mode
Your printer incorporates two print modes that allow you to choose
between print speed and print quality:
You use the PRINT MODE button to select the current print mode
when the printer is off-line. The default selection is HQ mode. Pressing
the
PRINT MODE button toggles from HQ to HS mode. The HS and
HQ lights indicate which mode is selected.
Print Mode Function Speed at 10 cpi
HS High speed and draft
quality printing 248 cps
HQ High quality printing 173 cps