Canon BJ-200e - Manual (Page 20)

Chapter 3
Loading Paper
This chapter describes how to load paper, envelopes, thick paper, and
transparencies in the printer. To ensure the best performance of your
printer, you want to select the best paper and load it correctly.
You can stack paper in the sheet feeder to load it automatically, or you
can manually feed one sheet at a time. The path that the paper travels
through the printer is the same for automatic and manual feeding.
Automatically Feeding Paper
Your printer produces letter-quality print on most plain bond papers,
including cotton bond papers and photocopying papers. This printer
does not require special ink-jet papers. However, the print quality varies
with different paper types.
Purchase a small amount of paper and test it to see if it meets your
printing requirements before committing to a specific paper type.
You can automatically feed single sheets of plain papers:
You can stack up to 100 sheets of plain paper (20 lb or 75 g/m²) in the
sheet feeder.
When you are ready to load plain paper, follow the steps in this section.
1. Extend the paper rest and the paper exit support.
2. Set the paper selection lever to the back position.
NOTE: Attempting to print on damp, curled, wrinkled, or torn paper can
cause paper jams and poor print quality.
Size: Letter 8 1/2 x 11 inches
Legal 8 1//2 x 14 inches
Thickness: Less than 0.008 inches (0.2 mm)
Weight: 17 to 24 lbs (64 to 90 g/m²)