Checking battery power – Nikon E2 - E2S User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking battery power
Be sure to check the camera’s battery power after installing a
fresh battery pack or prior to taking photographs in order to
avoid accidental failure,
1
2
Set the Main dial to any position
other than L. Confirm that the
indicators appear in the LCD panel
and inside the viewfinder.
While pressing the Main dial lock-release
button, rotate the Main dial.
—If no indicators appear, reinstall the
battery pack. (See page 21.)
Confirm that no warning indicator
appears.
If the da mark (Insufficient battery power
Indicator) blinks In the LCD panel, the
battery is weak. Replace with a fully
charged battery.
—If you continue to use the camera with the
indictor blinking, the camera may not
work correctly.
if the d3] mark blinks in the LCD panel,
immediately replace the battery with a
fully charged one.
-Battery power is exhausted.
22