Set the image quality to normal, Set the white balance to a, Set the sensitivity to std – Nikon E2 - E2S User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Selecting Programmed Auto mode
I
Set the image quality to NORMAL.
Keeping the QUALITY button pressed,
rotate the command dial to set the image
quality to NORMAL.
—See page 37 for details on image quality.
Set the white balance to A.
While pressing the W.Bal button, rotate the
command dial to set the white balance to A
(auto)
—See page 38 for details on white balance.
7
Set the sensitivity to STD.
While keeping the SENS button pressed,
rotate the command dial to set the
sensitivity to STD (standard).
—See page 41 for details on sensitivity.
28
Advertising