Using exposure compensation, To cancel exposure compensation, Set the exposure compensation value – Nikon E2 - E2S User Manual
Page 58: Exposure compensation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Exposure compensation
Using Exposure Compensation
I
Set the metering system
We recommend using Center-Weighted or
Spot Metering.
2
To cancel exposure compensation
Set the compensation value to 0.0.
Set the exposure compensation
value.
Rotate the command dial while pressing the
exposure compensation button.
—You can compensate exposure within a
range of +2.0 EV to -2.0 EV (in 1/4 EV
increments.)
—Rotate the command dial to increase the
value (-) when the background is dark,
and decrease the value (+) when the
background is bright.
Remove your finger from the
i exposure compensation button.
When the compensation is set, the exposure
compensation mark appears in the
viewfinder and the LCD panel.
—Press the exposure compensation button
to confirm the value set and the
compensation value will appear in the
LCD panel.
Check the focus indicator and fully
' depress the shutter release button.
58