In continuous servo autofocus mode – Nikon E2 - E2S User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
In Continuous Servo Autofocus mode
1
Position the focus brackets on the
subject and lightly press the shutter
release button.
2
Confirm that the in-focus indicator
• appears in the viewfinder, then
press and hold the AF-L button.
Focus is locked even if you remove your
finger from the shutter release button as
long as the AF-L button remains pressed.
While holding in the AF-L button,
recompose and then fully depress
the shutter release button to take a
picture.
Do not change the shooting distance after
the in-focus indicator • appears in the
viewfinder.
i
61
Advertising