Playing back the pictures, Connect the camera to a tv monitor, Rotate the main dial to pb (playback) – Nikon E2 - E2S User Manual
Page 31: Rotate the command dial, Playing back the pictures -32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing back the pictures
The camera has a built-in video output terminal that enables
you to immediately playback the exposed images on a TV
monitor with a video input terminal.
—Both NTSC and PAL color television systems are available with this camera.
See page 48 for switching from the NTSC to the PAL system or vice versa.
1
Connect the camera to a TV
monitor.
Connect the Video Cable EG-10 (provided)
to the camera's video output terminal and
the monitor’s video input terminal.
—See page 7 on removing the terminal cap.
Rotate the Main dial to PB
(playback).
3
Rotate the command dial.
Rotate the command dial once in either
direction to playback one frame.
—When you wish to playback a particular
frame, first rotate the command dial while
pressing the SENS button to specify the
frame number, then remove your finger
from the SENS button.
I
31