M : matrix metering, Center-weighted metering, Spot metering – Nikon E2 - E2S User Manual
Page 36: Setting the metering systems
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the metering systems
This camera features three types of exposure metering
systems—Matrix Metering, Center-Weighted Metering and Spot
Metering.
Rotate the command dial while pressing
the Metering system button.
—The metering system indicators in the LCD
panel appear in sequence as shown below.
M : Matrix Metering
Data on scene brightness and contrast are detected by the
camera’s 5-segment advanced matrix sensor. By analyzing
these data, the camera’s built-in computer is able to provide
correct exposure even in extremely complex lighting situations.
: Center-Weighted Metering
This system concentrates the meter's sensitivity on the 12mm-
dia. circle in the viewfinder. This type of metering is useful in
situations where you want to base exposure on a specific,
centrally located area in the scene.
[•] : Spot Metering
Most of the meter's sensitivity is concentrated in the 5mm-dia.
circle in the center of the viewfinder. This meter is effective when
precise measurement of a particular portion of the subject is
required.
36