Troubleshooting, Troubleshooting -86 – Nikon E2 - E2S User Manual

Page 85

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting

If your camera detects a defect or malfunction, a warning indicator

appears or blinks in the viewfinder and/or in the LCD panel to alert
you. Refer to the troubleshooting charts provided below and follow the
suggestion for correcting the problem before bringing your camera to
a Nikon Service Center for repair.

Warnina indication

Check this

Ref,

page

LCD

panel

Viewfinder

Cause

Remedy

blinks

1 --1

blinks

Camera back Is open
or camera back is
closed with no Image

Memory Card inside.

Insert a Nikon

approved Image

Memory Card. Close

the camera back.

P. 24

P. 82

blinks

A write-protected

Image Memory Card

is inserted.

Cancel write-

protection.

P. 82

blinks

( C d )

An uninitialized

Image Memory Card

is inserted.

Initialize the Image

Memory Card as
instructed in this
instruction manual.

P. 25

jCH*NO^

blinks

blinks

An Image Memory

Card not specified by

Nikon in the
instruction manual is
inserted.

Insert a Nikon

approved Image

Memory Card.

P. 82

n

u

blinks

No frames remain.

Insert a new Image

Memory Card.

P. 24

BODY

blinks

Display

Camera's NiCd

battery is weak.

Recharge the NiCd
battery.

P.83

da

blinks

CARD

blinks

segment

blinks

Battery power for
SRAM is weak.

Replace the battery

according to the

instruction.

CLOCK

blinks

Normal

display

Lithium battery for

clock is weak.

Replace the lithium

battery at a Nikon
Service Center.

85

Advertising