Selecting programmed auto mode, Set the focus mode to s, Set the frame advance mode to s – Nikon E2 - E2S User Manual
Page 27: Set the exposure mode to p, Set the metering system to k, Setting the frame advance mode, Setting the focus mode -44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting Programmed Auto mode
Programmed Auto is ideal for quick operation and is the
simplest method for exposure control. Use this mode for most
general photographic situations.
1
Set the focus mode to S.
Rotate the focus mode selector to S (Single
Servo Autofocus).
—See page 42 for details on focus modes.
2
Set the frame advance mode to S.
While pressing the Main dial lock-release
button, rotate the Main dial to S (Single
frame shooting),
—See page 34 for details on the frame
advance mode.
3
Set the exposure mode to P.
Keeping the MODE button pressed, rotate
the command dial to set the exposure mode
to P (Programmed Auto) mode.
—See page 35 for details on the exposure
mode.
Set the metering system to K.
While pressing the metering system button,
rotate the command dial to set the metering
system to Matrix Metering E*3.
—See page 36 for details on metering
systems.
I
27