Cleaning the camera’s built-in lens, Cleaning the camera's built-in lens -81 – Nikon E2 - E2S User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the camera’s built-in lens
When removing dirt and smudges from the camera’s built-in
lens (situated behind the shutter curtains), proceed in the
following way.
—Be sure to use DC adaptor ES-1 (optional) and Quick Charger EH-1 (EH-2)
(optional). You cannot use battery power for this operation.
—Read the instruction manuals provided with the DC adaptor, Quick Charger
and the Battery Pack.
1
Set the selector switch of the DC
adapter to BULB.
Connect the camera to the Quick
Charger with the DC adaptor.
Remove the lens mounted on the
camera, then turn the power ON.
Set the Main dial to any position other
than L.
—The "BULB" indicator appears in the LCD
panel.
Depress the shutter release button.
When the shutter is released, the shutter
curtains open, then the "BULB" indicator
starts to blink.
80