Nikon E2 - E2S - Manual (Page 42)

Setting the focus mode
I
This camera provides t\wo autofocus modes—Single Servo
Autofocus (S) and Continuous Servo Autofocus (C)— and a
Manual Focus mode (M) selected by setting the focus mode
selector to S, C or M,
S : Single Servo Autofocus
Lightly press the shutter release
button; the shutter can only be
released when the subject is in
focus and the in-focus indicator •
appears in the viewfinder, as the
priority is on correct focus. After
bcus is achieved, it remains locked
for as long as the shutter release
button remains lightly pressed.
Remove your finger from the
shutter release button once and
lightly press the button again when
you wish to refocus on a different
subject.
—If the shutter release button is fully
depressed from the start, the lens starts
adjusting for focus and the shutter is
released as soon as the subject is in focus.
With E2s cornera, both focus and exposure
are locked.
C : Continuous Servo Autofocus
The shutter can be released anytime,
regardless of focus status, since the
priority is on shutter release. The
camera continues focusing for as long
as you keep the shutter release button
lightly pressed, even when the in-focus
indicator • appears in the viewfinder.
—In Continuous Shooting mode (the Main
dial is set to C), the lens adjusts focus for
the first frame only, then the focus is
locked when continuous shooting starts.
42