Set the main dial to l, Set the main dial to l and turn the power off – Nikon E2 - E2S User Manual
Page 81
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
5
Use a blower to remove dust and
particles from the built-in lens.
—If this proves ineffective, take your
camera to an authorized Nikon Service
Center.
Set the Main dial to L.
—Make sure that the camera's reflex mirror
is kept in the up position.
—Do not touch the shutter curtains.
7
Set the Main dial to any position
other than L and press the shutter
release button halfway.
—Make sure that the camera's reflex mirror
is down in the normal position.
8
Set the Main dial to L and turn the
power OFF.
81
Advertising