Taking flash pictures in ttl auto flash mode, Set up your camera, Set up your speedlight – Nikon E2 - E2S User Manual
Page 68: Confirm the settings in the lcd panel, Taking flash pictures in ttl auto flash mode -69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Taking flash pictures in TTL auto flash mode
Flash photography in TTL auto flash nnode with SB-26 and
SB-25 Nikon Speedlights.
—For more details, read the instruction manual provided with each Speedlight
model before use.
1
2
Set up your camera.
Set the metering system to Matrix Metering.
Set other settings to desired modes.
Set up your Speedlight.
Set the power switch to STBY (standby
position) or ON. Set the flash mode selector
to TTL. Set the flash sync mode selector to
NORMAL.
Confirm the settings in the LCD
panel.
If the [in flash mode Indicators appear
In the LCD panel, Matrix Balanced Fill Flash
Is selected. If the OD Indicator lights up In
the LCD panel, Standard TTL flash is
selected.
—Press the [M] button to change the flash
mode.
68